Shop headings: New Spares | Used Spares | Accessories | Brands
Brake pad spring for single pin Brembo Goldline 30/34 calipers
Also suitable for some Ducati / Aprilia models. Brembo ref. 98.8248.50
1 in stock
20419685 GU20419685 20 41 96 85
2041 9685 2041.9685 20.41.96.85
£12.00
INC VAT
£10.00 EX VAT
Brakelight switch for handlebar mounted master cylinder
Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815 or ELA30860. Sometimes supplied with three terminals, in this instance disregard middle terminal. Please note that terminals are smaller than standard switch and will need to be soldered on.
1 in stock
30749860 GU30749860 30 74 98 60
3074 9860 3074.9860 30.74.98.60
£13.50
INC VAT
£11.25 EX VAT
One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area.
See BRA99014 for high performance alternative
More than 5 in stock
£13.75
INC VAT
£11.46 EX VAT
Pair of EBC FA047 brake pads for Brembo F05 (P5) calipers and Grimeca front calipers
5 in stock
27654610-z 27654610 GU27654610 27 65 46 10
2765 4610 2765.4610 27.65.46.10
Also fits Benelli 250 TS, Ducati Pantah 500SL, Magni Sfida
£17.00
INC VAT
£14.17 EX VAT
Pair of Brembo 07BB0106 carbon ceramic brake pads with wear indicators for Brembo F05 (P5) and Grimeca calipers
For rear only on Daytona, 1100 Sport, Centauro and V11 Sport. Fronts only on Strada 750 (Brembo equipped). Fits Nevada up until frame no. LK112433 Fits V50 ALL front and rear
This part is due back in stock soon, call 01484 841395 to reserve yours
27654610-z 27654610 GU27654610 27 65 46 10
2765 4610 2765.4610 27.65.46.10
Also fits Benelli 125 2C Fronts, Benelli 504 Sport Fronts (1976), Benelli 654 Fronts (1983), Bimota YB7 Rear (1989), Ducati 620 i.e Rear (2001), Ducati Monster 900 i.e. Rear (2002), Ducati Monster 1000 Rear (2003), Ducati Monster 1000 S Rear (2004), Ducati Monster S4 Rear (2001), Moto Morini Dart 350 Rear (1987), Moto Morini 350 Kanguro Rear (1987), Moto Morini Excaliber 350/501 Rear (1993-)
£17.50
INC VAT
£14.58 EX VAT
Brakelight switch for handlebar mounted master cylinder
Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815. See ELA30861 for less expensive alternative part. Sometimes supplied with three terminals, in this instance disregard middle terminal
4 in stock
30749860 GU30749860 30 74 98 60
3074 9860 3074.9860 30.74.98.60
£17.60
INC VAT
£14.67 EX VAT
Pair of EBC FA095 brake pads for Brembo 5165 single pin four piston calipers
We advise checking your front caliper(s) have one not two pad pins
More than 5 in stock
30654602-z 30654602 GU30654602 30 65 46 02
3065 4602 3065.4602 30.65.46.02
Also fits Magni Sfida
£18.80
INC VAT
£15.67 EX VAT
Brembo remote brake master cylinder cover kit including screws, cap and rubber
Brembo ref. 110430890
This part is available by special order, request a quote
30661100 GU30661100 30 66 11 00
3066 1100 3066.1100 30.66.11.00
£19.00
INC VAT
£15.83 EX VAT
Pair of Ferodo FRP408 brake pads for Brembo 5165 4 piston single pin calipers
We advise checking your front caliper(s) have one not two pad pins.
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
Developed from Ferodo's extensive racing history, unrivalled by any of our competitors
Highest friction level available for motorcycle racing
Developed by world champions for future world champions
Stable friction level achieving excellent modulation
Fast bedding-in period
Applications to fit all major racing calipers
Suitable for stainless steel and cast iron discs
2 in stock
30654602-z 30654602 GU30654602 30 65 46 02
3065 4602 3065.4602 30.65.46.02
£20.50
INC VAT
£17.08 EX VAT
Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems
These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt
More than 5 in stock
Also fits Benelli 250 TS
£21.00
INC VAT
£17.50 EX VAT